Start a conversation

ExaLINK Fusion

  • Setup for operating BGP in a Fusion environment.

    In this example, there are four servers: A and B are physically attached to the Fusion, while C and D are connected to a BGP router. Servers A and B and Router A and Router B are connected through a F...

  • Using md5sum to validate a Fusion download

    md5sum is a standard package for most Linux distributions, it is provided by the GNU coreutils - see https://www.gnu.org/software/coreutils/manual/html_node/md5sum-invocation.html It is used to valida...

  • ExaLINK Fusion : Understanding Support, Licensing and FPGA Modes

    License files Each ExaLINK Fusion device requires a license file from Exablaze. The license file enables usage of the Fusion, firmware upgrades as well as any additional features which may have been p...

  • Fusion Fan and Temperature Sensors and Setting thresholds and SNMP traps

    The following thresholds in degrees Celsius are set in our software:  Mainboard: target=40, alert=50, critical=70 (deg C) Crosspoint: target=60, alert = 70, critical = 80 (deg C)  Linecards: target=50...

  • SFP support

    We aim to support any spec-compliant SFP. We use a large number of Finisar, 10GTek, FiberStore and Exablaze SFPs in our lab, and we've got several customers using Cisco SFPs....

  • Setup for operating BGP in a Fusion environment.

    In this example, there are four servers: A and B are physically attached to the Fusion, while C and D are connected to a BGP router. Servers A and B and Router A and Router B are connected through a F...

  • Using md5sum to validate a Fusion download

    md5sum is a standard package for most Linux distributions, it is provided by the GNU coreutils - see https://www.gnu.org/software/coreutils/manual/html_node/md5sum-invocation.html It is used to valida...

  • ExaLINK Fusion : Understanding Support, Licensing and FPGA Modes

    License files Each ExaLINK Fusion device requires a license file from Exablaze. The license file enables usage of the Fusion, firmware upgrades as well as any additional features which may have been p...

  • Fusion Line Card Interoperability

    Older Fusion SFP line cards(SFP-16A) are not interoperable with the newer version SFP or QSFP line cards, you can only run with 1,2 or 3 bays of the older SFP version.  You can run your Fusion with a ...

  • Fusion Fan and Temperature Sensors and Setting thresholds and SNMP traps

    The following thresholds in degrees Celsius are set in our software:  Mainboard: target=40, alert=50, critical=70 (deg C) Crosspoint: target=60, alert = 70, critical = 80 (deg C)  Linecards: target=50...